1-2/5" X 3/16" Tube Beer Tap Faucet Draft Shank With Elbow Brass
- List PriceUS$16.93piece
- Sale PriceUS$16.93piece
- ShippingFree Shipping
Installation Type: Centerset
Installation Holes: One hole
Number of Handles: Single Handle
Valve Type: Ceramic valve
Cold and Hot Switch: Yes
Overall Height: 173mm
Spout Height: 80mm
Spout reach approx : 100mm
Tap hole diameter required: 35mm
1. 0.5 to 5 Bar water pressure required.
2. 2 flexible hoses & fittings are supplied.
3. Maximum operating water temperature 90℃.
4. Diffuser fitted in spout for smooth water flow .
5. Brass bodied highly polished chrome finish basin tap.
6. The body and lever are made from Brass with a polished 'mirror' Chrome Finish.
7. Single lever for operation. Move lever Left/Right for Hot / Cold, Up/Down for water flow.
8. There is a red/blue badge indicator for denoting the hot & cold situated underneath the lever. This can be rotated.
1. Put the water in the pipe first, Thoroughly rinse the impurities of conduit before installation.
2. The faucet connect to the cold and hot water supply pipe must be correctly. In the face of the tap, on the left by hot water, Right by cold water.
3. Be carefull when you install the faucet, choose the appropriate wrench, Don't overstrain install to damaged the parts.
1 x Basin mixer tap
1 x Fitting kit
2 x Flexible connection hoses
1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please consider this before the purchase.
2. Compare the detail sizes with yours, please allow 1-2cm differs due to manual measurement !